parsekit_func_arginfo
ok, heres what ya do to handle child process's ... :>
you want to pfork your main program, and let it exit,
allowing the new child to become the main program (parent process).
example psudo code :
main program start;
....
if pfork'd child ok
then exit ;
// now your new child process is in control...
// use a signal handler to make it exit (sigkill or sigterm probably)
// when this new process pforks, store the new child PID's in an
// array. when your process catch's the sigterm signal
// loop thru the array of its child PID's sending each child
// sigkill , then call pwait on them to wait for them to exit.
// this will make sure any child process are cleaned up ok
// THEN .. now here's the trick....
// reset yer sigterm handler BACK to its original default handler,
// thennnnn raise sigterm , main program will exit ok now tooooo :>
example:
when your pfork'd main process gets sigterm ... then do something
like this :
foreach ($this->pForkList as $kiddie) {
$deadPID = 0;
$this->sendSignal(SIGKILL,$kiddie);
do {
$deadPID = pcntl_waitpid(-1,WNOHANG);
if ($deadPID > 0) {
// kiddie has exited now ...
unset($this->pForkList[ array_search($deadPID,$this->pForkList)]);
break;
} // end if
} while ($deadPID == 0);
} // end for
// now reset sigterm ...
$this->signalSet($sigNum,SIG_DFL);
// RAISE sigterm now ...
$this->sendSignal(SIGTERM,$this->myPID);
this will allow your main process and all its child process's to exit properly and not leave and zombies or other bad stuff behind !
CXVIII. Process Control Functions
Úvod
Process Control support in PHP implements the Unix style of process creation, program execution, signal handling and process termination. Process Control should not be enabled within a web server environment and unexpected results may happen if any Process Control functions are used within a web server environment.
This documentation is intended to explain the general usage of each of the Process Control functions. For detailed information about Unix process control you are encouraged to consult your systems documentation including fork(2), waitpid(2) and signal(2) or a comprehensive reference such as Advanced Programming in the UNIX Environment by W. Richard Stevens (Addison-Wesley).
PCNTL now uses ticks as the signal handle callback mechanism, which is much faster than the previous mechanism. This change follows the same semantics as using "user ticks". You use the declare() statement to specify the locations in your program where callbacks are allowed to occur. This allows you to minimize the overhead of handling asynchronous events. In the past, compiling PHP with pcntl enabled would always incur this overhead, whether or not your script actually used pcntl.
There is one adjustment that all pcntl scripts prior to PHP 4.3.0 must make for them to work which is to either to use declare() on a section where you wish to allow callbacks or to just enable it across the entire script using the new global syntax of declare().
Poznámka: Toto rozšíření není k dispozici na platformách Windows.
Požadavky
Tyto funkce jsou k dispozici jako součást standardního modulu, který je vždy dostupný.
Instalace
Process Control support in PHP is not enabled by default. You have to compile the CGI or CLI version of PHP with --enable-pcntl configuration option when compiling PHP to enable Process Control support.
Poznámka: Currently, this module will not function on non-Unix platforms (Windows).
Konfigurace běhu
Toto rozšíření nemá definováno žádné konfigurační direktivy.
Typy prostředků
Toto rozšíření nemá definován žádný typ prostředku (resource).
Předdefinované konstanty
The following list of signals are supported by the Process Control functions. Please see your systems signal(7) man page for details of the default behavior of these signals.
- WNOHANG (integer)
- WUNTRACED (integer)
- SIG_IGN (integer)
- SIG_DFL (integer)
- SIG_ERR (integer)
- SIGHUP (integer)
- SIGINT (integer)
- SIGQUIT (integer)
- SIGILL (integer)
- SIGTRAP (integer)
- SIGABRT (integer)
- SIGIOT (integer)
- SIGBUS (integer)
- SIGFPE (integer)
- SIGKILL (integer)
- SIGUSR1 (integer)
- SIGSEGV (integer)
- SIGUSR2 (integer)
- SIGPIPE (integer)
- SIGALRM (integer)
- SIGTERM (integer)
- SIGSTKFLT (integer)
- SIGCLD (integer)
- SIGCHLD (integer)
- SIGCONT (integer)
- SIGSTOP (integer)
- SIGTSTP (integer)
- SIGTTIN (integer)
- SIGTTOU (integer)
- SIGURG (integer)
- SIGXCPU (integer)
- SIGXFSZ (integer)
- SIGVTALRM (integer)
- SIGPROF (integer)
- SIGWINCH (integer)
- SIGPOLL (integer)
- SIGIO (integer)
- SIGPWR (integer)
- SIGSYS (integer)
- SIGBABY (integer)
Příklady
This example forks off a daemon process with a signal handler.
Příklad 1436. Process Control Example
<?php
declare(ticks=1);
$pid = pcntl_fork();
if ($pid == -1) {
die("could not fork");
} else if ($pid) {
exit(); // we are the parent
} else {
// we are the child
}
// detatch from the controlling terminal
if (!posix_setsid()) {
die("could not detach from terminal");
}
// setup signal handlers
pcntl_signal(SIGTERM, "sig_handler");
pcntl_signal(SIGHUP, "sig_handler");
// loop forever performing tasks
while (1) {
// do something interesting here
}
function sig_handler($signo)
{
switch ($signo) {
case SIGTERM:
// handle shutdown tasks
exit;
break;
case SIGHUP:
// handle restart tasks
break;
default:
// handle all other signals
}
}
?>
Viz také
A look at the section about POSIX functions may be useful.
Obsah
- pcntl_alarm — Set an alarm clock for delivery of a signal
- pcntl_exec — Executes specified program in current process space
- pcntl_fork — Forks the currently running process
- pcntl_getpriority — Get the priority of any process
- pcntl_setpriority — Change the priority of any process
- pcntl_signal — Installs a signal handler
- pcntl_wait — Waits on or returns the status of a forked child
- pcntl_waitpid — Waits on or returns the status of a forked child
- pcntl_wexitstatus — Returns the return code of a terminated child
- pcntl_wifexited — Checks if status code represents a normal exit
- pcntl_wifsignaled — Checks wether the status code represents a termination due to a signal
- pcntl_wifstopped — Checks wether the child process is currently stopped
- pcntl_wstopsig — Returns the signal which caused the child to stop
- pcntl_wtermsig — Returns the signal which caused the child to terminate
add a note
User Contributed NotesProcess Control Functions
flyingguillotine1968 at yahoo dot com
12-Aug-2007 05:16
12-Aug-2007 05:16
kementeusNOSPAM at gmail dot com
28-Dec-2006 09:43
28-Dec-2006 09:43
In the example of the documentation we need to put the pctnl_signal statements BEFORE the while loop.
In that way we can execute whatever we put in the signal handler functions.
corychristison at lavacube dot com
02-Nov-2004 06:53
02-Nov-2004 06:53
An easier way than what was first suggested in the first comment, to retrieve what signal your application is being sent would be to use get_defined_constants() to list all constants, loop through and strip out those that are not signals, and to check if it matches the value.
Here is my code for doing this, written for PHP5 only.
<?php
// php5 Specfic
function pcntl_sig_identify ( $sig_no ) {
$get_constants = get_defined_constants(true);
$pcntl_contstants = $get_constants["pcntl"];
$keys = array_keys( $pcntl_contstants );
foreach($keys as $key){
if(strstr($key, "SIG") && !strstr($key, "_") && $pcntl_contstants[$key] == $sig_no){
return $key;
}
} // end loop
} // end function pcntl_sig_identify
//
// This example will output "SIGTERM"
//
print pcntl_sig_identify(15) . "\n";
?>
andy at cbeyond dot net
20-Aug-2004 09:26
20-Aug-2004 09:26
Suppose you want to fork off children to handle a few hundred different targets (like, say, SNMP polling, but that's just one example). Since you don't want to fork-bomb yourself, here's one method of limiting the number of children you have in play at any one time:
#!/usr/bin/php -q
<?php
declare(ticks = 1);
$max=10;
$child=0;
// function for signal handler
function sig_handler($signo) {
global $child;
switch ($signo) {
case SIGCHLD:
echo "SIGCHLD received\n";
$child -= 1;
}
}
// install signal handler for dead kids
pcntl_signal(SIGCHLD, "sig_handler");
for ($i=1;$i<=20;$i++) {
while ($child >= $max) {
sleep(5); echo "\t Maximum children allowed\n";
}
$child++;
$pid=pcntl_fork();
if ($pid == -1) {
die("could not fork");
} else if ($pid) {
// we are the parent
} else {
// we are the child
echo "child number $i\n";
// presumably doing something interesting
sleep(15);
exit;
}
}
04-Dec-2003 03:52
in example 1, i found unless i create function sig_handler _BEFORE_ pcnt_signal, it wouldnt work.. and would just fall to the floor bleeding to death
(note for people having these kinda probs)
cameronNO_SPAM at tripdubdev dot com
18-Nov-2003 12:36
18-Nov-2003 12:36
I'm currently working on some code for this, but in case I forget to come back to post to the board, or in case it takes me a while, why not just have a separate background job running (started up via the shell) that tracks which sockets are available to clients ? Then all you'd have to do is communicate with the one job (or perhaps its own mini-server) run in the background that keeps an array of the available sockets for the server. This seems the most natural alternative since PHP disclaims that process control functionality should not be used in a web-server environment. I would hate to build a server, especially one with high traffic, that had to run through a loop in order to find an available socket.
luca dot mariano at email dot it
12-Nov-2003 06:49
12-Nov-2003 06:49
Hi folks,
if someone uses PHP-CLI onWin32 and wants to experiment the PCNTL stuff, I've packed a binary version of PHP with built-in pcntl, shmop, sysvshm and other typical Unix extensions... (thanks to Cygwin DLLs).
Download it: http://phplet.sf.net/modules.php?name=Web_Links&l_op=visit&lid=4
jeremy at nirvani dot net
15-Oct-2003 08:54
15-Oct-2003 08:54
#!/usr/local/bin/php -q
<?php
# Jeremy Brand <jeremy@nirvani.net>
# http://www.nirvani.net/
# ./configure --enable-pcntl --enable-sigchild
# make
# make install
# This code example shows how to use a script to do multiprocessing. Each time
# this script is ran, the result is 5 (in this example) processes running to
# accomplish a specified task.
# Examples could be a messaging queue. You could get the number of messages in
# a queue and handle any or all of them asynchronously.
# Get the number of children you want to be born by running this
# script once.
$children = 5; # likely a function call here.
for ($i=1; $i<=$children; $i++)
{
$pid = pcntl_fork();
if ($pid == -1)
{
die("could not fork\n");
}
else if ($pid)
{
# If we are the parent, we did our job of giving birth,
# now lets finish our job and die!
exit(0);
}
else
{
# Since we are the child, fork so that init will become our parent. Init
# is good at wait()ing on children - ie: reaping.
$cpid = pcntl_fork();
if ($cpid == -1)
{
die("could not fork in child process\n");
}
if (!$cpid)
{
# We have now forked off from our parent and also are not waiting on any
# other children to process, however other children are running
# simutaniously to us. Make sure the code you write here is safe to run
# in this environment of multiprocessing - ie: proper locking, etc.
# Write the custom code here that you want to multiprocess.
# ADD CODE HERE TO MULTIPROCESS
print "we are child number $i\n";
# Don't forget to exit after the child processing is done. Certainly
# change this exit code if you need to however.
exit(0);
}
}
}
?>
David Koopman
14-Sep-2003 01:32
14-Sep-2003 01:32
I had a hard time finding a complete example of using PHP as a multi-process (or multi-threaded - I don't understand the difference in these two terms) daemon using connection pooling. I put pieces of the puzzle together and came up with the program below. I hope it helps someone. Notes about making this work:
1) I rebuilt PHP on my machine with these config options:
./configure --enable-sockets --enable-pcntl --enable-sigchild
make
make install
2) I have problems when tried to handle SIGTERM and SIGHUP myself, so I removed these from my code, don't use them unless you have a special need for this:
pcntl_signal(SIGTERM, "sig_handler");
pcntl_signal(SIGHUP, "sig_handler");
What I do is:
1. start the program, then fork to detach from the terminal (kill the parent and make the child the session leader).
2. bind to address and port and start listening.
3. fork $poolNum times, creating $poolNum children (this is the pool of daemons running. The children handle the incoming connections).
4. keep the parent process running in a loop, constantly checking to see if it should create a new child. It will always keep $poolNum spare children ready (as long as the total pooled connections doesn't exceed $maxDaemon). As connections come in, more children are spawned.
5. When a new connection comes in, it is handed off to the first child. This child then sends a SIGUSR1 signal back to the parent. The parent has a signal handler for SIGUSR1, which will increment the $numActive variable by one. The loop that is running (see 4 above) will note the increment in $numActive and automatically create a new child process to keep the process pool going.
I have to post the code in the next note, the note engine on this site won't allow such a long note to be posted, but I think this code example is well worth a comment on this...
schst at php dot net
01-Sep-2003 07:39
01-Sep-2003 07:39
To get rid of the zombies when child processes terminate you do not have to write a lot of code that uses complex stuff like message queues.
Instead you only set a signal handler:
pcntl_signal(SIGCHLD, SIG_IGN);
Stephan
Patrice Levesque
14-Jun-2003 01:11
14-Jun-2003 01:11
So, you want to create multiple child processes and don't want any zombies, don't you?
You can use IPC to achieve just that. Every child that is spawned has to tell its parent that time has come for him to be terminated. So, yes, zombies will be created, but once in a while the parent will 'clean up' after his kids. Code:
<?php
declare(ticks = 1);
// create a IPC message queue
$msgqueue = msg_get_queue(ftok("/tmp/php_msgqueue.stat", 'R'),0666 | IPC_CREAT);
// loop for 1000 children
for ($c = 0; $c < 1000; $c++) {
// fork
$pcid = pcntl_fork();
if ($pcid == -1) {
die("Could not fork!");
}
elseif ($pcid) { // we are the parent, look for zombie kids and terminate 'em
// look in the IPC message queue if there are any entries
$currentqueue = msg_stat_queue($msgqueue);
$n = $currentqueue['msg_qnum']; // number of messages (number of kids to terminate)
if ($n > 0) {
echo "There are $n kids to terminate.\n";
for ($i = 0; $i < $n; $i++) {
// pop the kid's PID from the IPC message queue
if (!msg_receive ($msgqueue, 1, $msg_type, 16384, $msg, true, 0, $msg_error)) {
echo "MSG_RECV ERROR: $errmsg \n"; // something has gone wrong
}
else {
pcntl_waitpid($msg, $tmpstat, 0); // terminate kid for real.
};
};
};
}
else { // we are the child!
if (!posix_setsid()) { die ("Could not detach"); }; // detach
echo "I am child number $c\n";
sleep(5); // do something useful
// tell dad I'm finished via IPC: send him my PID
if (!msg_send($msgqueue, 1, posix_getpid(), true, true, $errmsg)) {
echo "MSG_SEND ERROR: $errmsg \n";
};
exit(); // become a zombie until dad kills me
};
};
?>
van[at]webfreshener[dot]com
10-Oct-2002 07:53
10-Oct-2002 07:53
Forking your PHP daemon will cause it to zombie on exit.
...or so I've seen on:
FreeBSD (PHP4.2.x)
Debian (PHP4.3.0-dev)
Darwin (PHP4.3.0-dev)
This was tested with the example code above and other scripts created for evaluation.
Seems adding --enable-sigchild to your configure will get rid of the problem.
Hope that saves some hair tearing :]
keksov[at]gmx.de
29-May-2002 10:10
29-May-2002 10:10
You have to use socket_select before socket_accept, so your code will wait for connection with select. socket_select can be interrupted by signals easily. Below is an example from my library (methods of class TNetSocket):
//-- select
function select($aread=NULL,$awrite=NULL,$aexcept=NULL,$timeout=NULL)
{
while(1)
{
$res="";
$res=socket_select($aread, $awrite, $aexcept, $timeout);
// if errno===0 it means what select was interrrupted by SysV signal
if($res===false && socket_last_error($this->socket())!==0)
{ // error occured, interrupted not by a signal
$this->set_socket_error(__LINE__);
return(false);
}
break;
}
return(true);
}
//-- accept, wait for incomming connection
function accept()
{
$this->clear_socket_error();
$this->set_io_socket(_SOCKET_);
$socket=$this->socket();
$aread=array($socket);
if ($this->select($a=&$aread)===false)
return(false);
$child_socket=socket_accept($this->socket);
if($child_socket <= 0)
{ // error occured
$this->set_socket_error(__LINE__);
return(false);
}
$this->child_socket=$child_socket;
$this->sockets[_CHILD_SOCKET_]=&$this->child_socket;
$this->set_io_socket(_CHILD_SOCKET_);
$a=&$this->peername;
$res=socket_getpeername($child_socket,$a);
if($res <= 0)
{ // error occured
$this->set_socket_error(__LINE__);
return(false);
}
$this->get_address_and_port(_CHILD_SOCKET_);
TLogManager::phpserv("Connection accepted. ADDRESS $this->address, PORT $this->port","net_socket",__FILE__,__LINE__);
$this->connected=true;
return(true); // return new object of TNetSocket type
}
daniel[at]lorch.cc
27-Feb-2002 03:48
27-Feb-2002 03:48
This piece of code helped me to find out what signals are being sent to my process:
function sig_identify($signo) {
switch($signo) {
case SIGFPE: return 'SIGFPE';
case SIGSTOP: return 'SIGSTOP';
case SIGHUP: return 'SIGHUP';
case SIGINT: return 'SIGINT';
case SIGQUIT: return 'SIGQUIT';
case SIGILL: return 'SIGILL';
case SIGTRAP: return 'SIGTRAP';
case SIGABRT: return 'SIGABRT';
case SIGIOT: return 'SIGIOT';
case SIGBUS: return 'SIGBUS';
case SIGPOLL: return 'SIGPOLL';
case SIGSYS: return 'SIGSYS';
case SIGCONT: return 'SIGCONT';
case SIGUSR1: return 'SIGUSR1';
case SIGUSR2: return 'SIGUSR2';
case SIGSEGV: return 'SIGSEGV';
case SIGPIPE: return 'SIGPIPE';
case SIGALRM: return 'SIGALRM';
case SIGTERM: return 'SIGTERM';
case SIGSTKFLT: return 'SIGSTKFLT';
case SIGCHLD: return 'SIGCHLD';
case SIGCLD: return 'SIGCLD';
case SIGIO: return 'SIGIO';
case SIGKILL: return 'SIGKILL';
case SIGTSTP: return 'SIGTSTP';
case SIGTTIN: return 'SIGTTIN';
case SIGTTOU: return 'SIGTTOU';
case SIGURG: return 'SIGURG';
case SIGXCPU: return 'SIGXCPU';
case SIGXFSZ: return 'SIGXFSZ';
case SIGVTALRM: return 'SIGVTALRM';
case SIGPROF: return 'SIGPROF';
case SIGWINCH: return 'SIGWINCH';
case SIGPWR: return 'SIGPWR';
}
}
function sig_handler($signo) {
echo "Caught " . sig_identify($signo) . " (" . $signo . ") on " . posix_getpid() . "\n";
}
pcntl_signal(SIGFPE, "sig_handler");
pcntl_signal(SIGHUP, "sig_handler");
// pcntl_signal(SIGINT, "sig_handler");
pcntl_signal(SIGQUIT, "sig_handler");
pcntl_signal(SIGILL, "sig_handler");
pcntl_signal(SIGTRAP, "sig_handler");
pcntl_signal(SIGABRT, "sig_handler");
pcntl_signal(SIGIOT, "sig_handler");
pcntl_signal(SIGBUS, "sig_handler");
pcntl_signal(SIGPOLL, "sig_handler");
pcntl_signal(SIGSYS, "sig_handler");
pcntl_signal(SIGCONT, "sig_handler");
pcntl_signal(SIGUSR1, "sig_handler");
pcntl_signal(SIGUSR2, "sig_handler");
pcntl_signal(SIGSEGV, "sig_handler");
pcntl_signal(SIGPIPE, "sig_handler");
pcntl_signal(SIGALRM, "sig_handler");
pcntl_signal(SIGTERM, "sig_handler");
pcntl_signal(SIGSTKFLT, "sig_handler");
pcntl_signal(SIGCHLD, "sig_handler");
pcntl_signal(SIGCLD, "sig_handler");
pcntl_signal(SIGIO, "sig_handler");
pcntl_signal(SIGTSTP, "sig_handler");
pcntl_signal(SIGTTIN, "sig_handler");
pcntl_signal(SIGTTOU, "sig_handler");
pcntl_signal(SIGURG, "sig_handler");
pcntl_signal(SIGXCPU, "sig_handler");
pcntl_signal(SIGXFSZ, "sig_handler");
pcntl_signal(SIGVTALRM, "sig_handler");
pcntl_signal(SIGPROF, "sig_handler");
pcntl_signal(SIGWINCH, "sig_handler");
pcntl_signal(SIGPWR, "sig_handler");
I commented out SIGNIT, as it is the signal which is sent to your process when you press CTRL-C. If you catch this signal, you must handle it properly:
function sig_handler($signo) {
switch($signo) {
case SIGINT:
// customized cleanup code
exit; // now exit
break;
}
}
Otherwise the only possibility to stop your process is by sending a SIGKILL signal - you can do this on the shell by typing "kill -9 PID" (where -9 is the numerical value for SIGKILL).
Note: You cannot add a handler (i.e. ignore signals) for SIGSTOP and SIGKILL - for obvious reasons.